Snap Ring Kit, Remove and Install Kit (Select Options)
$118.31
Description
To displace & remove snap ring:
- Tooling is designed to be bolted to your work bench
- The holes in the back of the base tooling will displace the collar from the top of the snap ring
- The slots on the front of the base tooling will strip the snap ring out of its groove by pulling it down/striping the snap ring off the shaft
- Put bullet over the end of the shaft
- Put snap ring on the bullet
- Take seating sleeve and push snap ring into the groove
- Then by lifting the drive up and tapping on the seating sleeve you would insert the snap ring into the lock cup
- A158-2504-UB Universal Base
- All Five snap ring installers and lock cup seating sleeves, A158-2504-2 through A158-2504-6
Application | Size | Base # | Installer & Seating Sleeve # |
Volkswagen | .375 to .435, 9.52mm to 11.04mm | A158-2504-2B | A158-2504-2 |
Delco 5 & 10MT- Some Gear Reductions | .420 to .480, 10.66mm to 12.19mm | A158-2504-3B | A158-2504-3 |
Delco Industrial- 10 to 35MT | .455 to .515, 11.55mm to 13.08mm | A158-2504-4B | A158-2504-4 |
Bosch- Datsun and other import applications | .520 to .580, 13.20mm to 14.73mm | A158-2504-5B | A158-2504-5 |
Bosch- Lucas- Nippondenso- Mitsubishi Industrial | .625 to .685, 15.87mm to 17.39mm | A158-2504-6B | A158-2504-6 |
Note: Bases & Installer/Seating Sleeves can be purchase separately.
Shipping Rates:
Estimator works for USA shipping only.
International shipping rates are calculated during checkout
International shipping rates are calculated during checkout
Snap Ring Kit, Remove and Install Kit (Select Options)
$118.31